FBS - Flying Beam Saw

The FBS Flying Saw is designed to cut on fly panels or materials and is working at a production speed from 150 to 200 fpm. Materials are squarely cut across the feed direction by a saw on angled rails.

High-speed square cuts across moving panels or materials. The Flying Beam Saw is working at a production speed from 150 to 200 fpm. Materials are squarely cut across the feed direction by a saw on angled rails. The beam saw carriage moves along the frame installed, at an angle in the range of 40 to 50 degrees.

A servomotor coupled with a timing belt and pulleys synchronizes the back and forth movement of the saw for each required cut. In order to cut the piece, a motor and spindle saw assembly are located over or under the material. In order to clear the piece on its way back and to pivot away in case of emergency, the motor assembly is mounted on a pivot powered with a pneumatic cylinder.

PLC controls receive encoder signals to determine work piece speed and the timing of the cross-cut. Controls can be manual push buttons with a keypad for dimension inputs or touch screen control. Safety fences along the traveling bar are included with the saw.