Detailed view
Video animation
PDF Brochure
OE
Electronic Operator
 
  
 

The electronic Operator lets you concentrate on the preparation, placement and removal of panels on your clamp carrier. Panel flattening, tightening of the clamps, indexing the next forward section and loosening the clamps occur automatically. This all happens while the
operator prepares to lay-up the next panels, cutting a two man job down to a one man job without loosing efficiency.

 

SPECIFICATIONS - OE

DESIGN
Modular design for easy integration onto new or existing DOUCET SRH Clamp Carriers
DESCRIPTION
A 5 H.P. power unit complete with a 7 g.p.m. pump and adjustable flow control valves
for single operator – workstation systems
A 7.5 H.P. power unit complete with a 10 g.p.m. pump and adjustable flow control valves
for dual operator – workstation systems
An electrical control panel with the system’s programmable controller
A motorized bi-directional carriage mounted on a floor level
raceway in front of the carrier’s workstation, including:
- a self-centering, self-engaging hydraulically motorized tightening and loosening tool
- a pneumatically retractable front rest to support the clamps during loosening and tightening
- a dual pneumatic panel flattener working in conjunction with the tightening tool
- sensors detecting the location of each clamp and the presence of a panel to be clamped
OPERATION
The automatic routine includes tightening clamps to the pre-set torque, by-passing clamps without panels, indexing the carrier to the next available section and releasing the panel by loosening the clamps as the carriage returns to its standby position.
Two tightening routines can be selected, sequential tightening
1, 2, 3, 4, 5, 6 etc... or alternating tightening 2, 1, 3, 5, 4, 6 etc...
The automatic mode is complemented by action keys initiating part or all
of the sub-routines in manual mode
Programmable adjustment of the clamp's front to rear opening (on carriers with standard clamps only)

 
 
DOWNLOAD
 



  

Video animation
PDF Brochure
DE
Automatic Overhead Loosener
 
  
 

 

The Overhead Loosener automatically loosens the clamps holding the panels in the section above the carrier's workstation while the operator lays-up, flattens and tightens the next panels. The system also indexes the carrier forward automatically. That approach enables
you to retain total control over the flattening and tightening of your panels, while reducing the time devoted to gluing panels up to 30%.

 

SPECIFICATIONS - DE

DESIGN
Modular design for easy integration onto new or existing DOUCET SRH Clamp Carriers
DESCRIPTION
A 5 H.P. power unit complete with a 7 g.p.m. pump and adjustable flow control valves
for single operator – workstation systems
A 7.5 H.P. power unit complete with a 10 g.p.m. pump and adjustable flow control valves
for dual operator – workstation systems
An electrical control panel with the system’s programmable controller
A motorized bi-directional carriage mounted on an overhead
raceway one section above the carrier’s workstation, including:
- a self-centering, self-engaging hydraulically motorized loosening tool
- a pneumatic retractable overhead rest to support the clamps during loosening
- sensors detecting the location of each clamp and the presence of a panel to be released
For a higher production requirements, the carrier's workstation is
equipped with two operator workstations, including two hydraulic
tightening tools and two pneumatic panel flatteners
OPERATION
The automatic routine includes indexing the carrier to the next available section then,
loosening clamps, by-passing clamps without panels as the carriage travels to its standby position.
The automatic mode is complemented by action keys initiating part or all of the sub-routines
in manual mode
Programmable adjustment of the clamp's front to rear opening (on carriers with standard clamps only)

 
 
 

DOWNLOAD