ZX-100 FINGERJOINTER
A Medium to High Production Unit for Non-Structural
Applications, for Hard Wood and Soft Wood

PDF Brochure

PRODUCTION CAPACITY
  
LUG SPEED

Up to 100 Pieces per Minute


MATERIAL SPECIFICATIONS
  
BLOCK LENGTH

5" to 30" (also 8" to 48")

BLOCK WIDTH

1.5" to 6" (also 1.5" to 8")
BLOCK THICKNESS 0.75" to 2"
FINISHED LENGTH Up to 40 Feet


FEATURES AND CHARACTERISTICS

The Doucet ZX-100 is a Double End Fingerjointer with lugs on 9" or 12" centers, a manual lug loading
table, a manual corner transfer, a pre-assembly tunnel and a 16 foot assembly press expandable in
increments of 4 feet up to 40 feet.



SYSTEM SPECIFICATIONS
  
THE ZX-100 FINGERJOINTER INCLUDES











A semi-automatic infeed table
Feed speed up to 75 feet per minute powered
by a 20 HP electric motor with variable speed drive
Lug speed up to 100 lugs per minute
14" trim saws (2) on 5 HP motors, 3400 RPM
10" scoring saws (2) on 3 HP motors, 3400 RPM
Cutterhead spindles (2) for 8 bolt WKW cutterheads on
20 HP soft start motors, 3400 RPM
Calibration readouts on saws and spindles
High precision ductile iron chain with automatic chain
lubrication and chain cleaning by air-jets
4" lug span for 5" to 30" stock
7" lug span for 8" to 48" stock
Compliant hold-down system
Synchronous even-ender system
Glue applicator, injection type, controlled by PLC


THE MANUAL CORNER TRANSFER INCLUDES
    

A gravity conveyor


THE HIGH SPEED ASSEMBLY TUNNEL FEATURES

    






Feed speed up to 350 feet per minute, powered by electric motors
Feed speed automatically regulated according to board flow
Flat chain bottom feed conveyor with stainless contact surfaces
Double flat chain lateral feed to prevent offset with stainless contact surfaces
Top hold-down to prevent vertical offset
Unimpaired access and visibility
Pneumatic quick release feature


THE AUTOMATIC PRESS INCLUDES
    






Broad radius offset corrector (optional)
Basic assembly press capacity up to 16 feet expandable up to 40 feet
Up to 10 press cycles per minute
14" cross-cut saw on 5 HP motor, 3400 RPM
Stainless steel contact surfaces
All four faces of boards held while pressing
Gull wing top for easy cleaning and maintenance