THE MOST COMPLETE LINE
OF END-MATCHERS

production

PRODUCTION END-MATCHERS

Doucet offers a complete family of Volume Production End-Matchers.   From the state-of-the-art GPS Model down to the entry level EM Model you will find a full range of machines with capabilities and capacities that will match your product needs and volume requirements.  

COMMON CHARACTERISTICS

 
There are designed to End-Match random length flooring of various width and thicknesses.
All models feature a traverse bar conveyor with machining centers on opposite sides of that conveyor. Two sets of “side-shift rollers” imbedded in the traverse bar conveyor align or realign the boars ahead of the machining centers. A third set of rollers is used to out-feed boards at the exit end of the machine.
All models are suitable for machining Tongue and Groove profiles on the opposite end of the boards, they feature machining centers equipped with saws for trimming blocks, machining the top and bottom tongue and cutting the matching groove. The trim saws and the top and bottom groovers are “climb cutting” tools rotating in the same direction as the direction of feed, thus avoiding chip out on the back side of the floor boards. The horizontal groover rotates against the direction of feed. In addition, the GPS Model can be configured to machine interlocking “Click” or “Snap” profiles
 
end matcher 01 end matcher 02
end matcher 03
On all models, machining is performed referring to the top surface of the boards.


UNIQUE CHARACTERISTICS

Unique characteristics such as feed speeds, motor horse power, special tooling configurations are spelled out in detail on the models respective pages.

SPFM end matcher GPS-90 end matcher PFM end matcher EM end matcher

specialty

SPECIALTY END-MATCHERS

Doucet offers an expanded family of Specialty End-Matchers for standard and oversized Flooring and Paneling Products.

MPB end matcher WPFM end matcher END-PRO end matcher
MPB WPFM END-PRO

The WPFM Model's configuration is similar to that of the Production End-Matchers, with a traverse bar conveyor, machining centers on opposite sides of the feed table and side-shift rollers imbedded in the feed conveyor.   It is designed to end-match boards up to 16 feet long and dome shaped products such as Log Home Siding.  

While the MPB and End-Pro Models are throughfeed models equipped with moving cutterheads machining the boards while they are clamped in a fixed position.   The End-Pro Model requires manual feeding of the boards while the MPB Model is equipped with automatic feed rollers.


ERGONOMIC GRADING & NESTING SYSTEMS


Speeding-Up Packaging by Minimizing Unproductive Motions